ORMAL KULIR – decorative finishing plaster

Product Description

Use: Decorative protection of facade and interior wall surfaces
Substrate: Dry, solid and clean; fine troweled lime, lime-cement and cement plasters are coated with acrylic impregnation, as well as concrete, asbestos-cement, wood-cement and
gypsum – cardboard substrates.
Preparation: Mix the contents well to obtain a foamy mass of uniform density.
Installation: With a stainless steel trowel: level the application, and when it loses its “milky” appearance, finally smooth it. We carry out the work as quickly as possible, without interruption, from one end edge of the wall to the other; on multi-storey buildings, we work simultaneously on all floors.
Warning: If we need a larger amount of plaster for a single wall surface (several packages), then we mix them together, to avoid inconsistency due to possible differences in shades on the finished wall surface, we recommend installing material from the same batch; the product contains natural marble grains, therefore differences in the samples shown are possible.
Temp. Substrate: From +5 C to +35 C. Protect the treated surface with Ormal kulir from moisture for at least 48 hours until final setting.
Storage: From +5 C to +25 C. Do not freeze.
Packaging: 7 and 25 kg buckets
Shelf life: 6 months